Quantec Controller
- Supplies power to and controls a Quantec Addressable Call System.
- Monitors all network devices and manages the routing and distribution of all calls.
- Provides connections for network wiring, standby batteries, a laptop (for system programming), optional paging/DECT equipment, an optional printer or PC (to run Quantec’s QT707S Surveyor data management software).
- Includes a library of 40 pre-set & 45 custom place names.
- System setup requires a laptop PC running Quantec’s QT707 programming tools.
- Can be semi-flush mounted using an QT385 bezel or fully-flushed using a BF359/3S stainless steel enclosure.
- System wiring requires one or more QT603 network splitters.
- Wiring should be made in a spine and limb arrangement using 1.5 to 2.5mm2 T&E (spines) and 4 to 8 core stranded security cable (limbs).
Technical Specifications
Mains supply | |
---|---|
Mains rated current | |
Internal power supply | |
Total output current limited to | |
Quiescent current | |
Max battery size and type | |
Cabling | |
Open collector outputs | |
Other outputs | 24V Aux. Power (19.5V min, 28V max). Protected by a resettable fuse. Max. current 100mA. |
PC connection | |
Indicators | |
Controls | Accept (A); Scroll Up; Scroll Down; Code Entry Buttons (1, 2, 3 and 4); Escape (E). |
Connections | |
Expansion connections | |
Product dimensions (mm) | 410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid). |
Construction & finish | |
IP Rating | |
Weight | |
Operating conditions/temperature |
Documentation
Dimensions & Mounting Information
Product dimensions: | 410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid). |
Hole required for semi-flush mounting: | 412 W x 255 H x 50 D mm. Requires QT385 bezel |