Quantec Interface Unit c/w Remote Socket
- Allows any device with a normally open or normally closed 6.35mm (1/4 inch) jack plug to be connected to Quantec.
- Particularly suited for use with our NC805MD Portable Movement Detector (n/o operation), QT644 Floor Pressure mat (n/o operation), QT633 Bed Exit mat (n/c operation) or QT634 Chair Exit Mat (n/c operation).
- Must be wired as a slave to a QT602 or QT609 range addressable call point or QT630 dementia care controller.
- When the device connected to the QT636 is operated a call will be generated on the Quantec call system as programmed.
- Mounts on a standard UK 25mm single gang back box.
Technical Specifications
Quiescent current | |
---|---|
Alarm current | |
Connections | |
Onboard 6.35mm Remote Jack Socket | |
Onboard Sounder | |
Onboard Infrared Receiver | |
Product dimensions (mm) | 87 W x 87 H x 33 D mm. Can be mounted on a standard UK 25mm single gang flush or surface back box. |
Construction & finish | |
IP Rating | |
Weight | |
Operating conditions/temperature |
Documentation
Dimensions & Mounting Information
Product dimensions: | 87 W x 87 H x 35 D mm. Can be mounted on a standard UK 25mm single gang flush or surface back box. |