Standard Call Push with Protruding Button, No Reset, No Remote

Standard Call Push with Protruding Button, No Reset, No Remote

Order code: NC917L Category: Call Points

A standard call point c/w protruding button for use with C-TEC’s 800 Series Call System.
Red reassurance LED confirms a call has been made.
Requires a separate reset point for cancelling calls.
Mounts on a standard UK 25mm single gang flush or surface back box.

Download Datasheet Print

Technical Specifications

Quiescent current	0mA.
Alarm current	Determined by the type of control equipment and number / type of field devices connected to the system.
Indicators	Red Reassurance LED (lit constant for Standard calls).
Controls	Red protruding call button (generates a Standard call when pressed). An additional 800 Series device with a reset function is required to reset this device.
Connections	SIG (Signal); -Ve (Negative).
Onboard Sounder	No
Onboard Infrared Receiver	No.
Product dimensions (mm)	87 W x 87 H x 32 D mm. Mounts on a UK 25mm single gang back box.
Construction & finish	Plastic.
IP Rating	IP41.
Weight	62g.
Operating conditions/temperature	-5ºC to +40ºC. Max. relative humidity 95% non-condensing.

Documentation

NC917L Call Button Instructions – DUC9170100	33.53 KB	Download
EU Declaration of Conformity – 800 Series Call Points (DoC)	256.82 KB	Download
UKCA Declaration of Conformity – 800 Series Call Points (DoC)	101.17 KB	Download

Dimensions & Mounting Information

Product dimensions:	87 W x 87 H x 24 D mm. Mounts on a 25mm UK single gang back box.

BIM/CAD Drawings

NC917L Flush mounted BIM (RFA)

NC917L Surface mounted BIM (RFA)

Other products in the same category