Switchable Sounder

Order code: NC887D Category: Overdoor Lights & Sounders

Can be connected to any multi-zone 800 Series Call Controller or Master Indicator Panel to increase call indication levels.
Indicates Standard calls via a constant tone and Emergency calls via a pulsing tone.
Can be switched off when not required (e.g. during night shifts to reduce call indication levels).
Can control up to two NC888D remote sounders.
When switched OFF, a red reassurance LED will illuminate as a warning.

Quiescent current	0mA (none).
Alarm current	Determined by the type of control equipment and number / type of field devices connected to the system.
Indicators	Multi-colour remote LED. Illuminates green when the switchable sounder is turned ON and red when it is turned OFF. Should a call be made when the sounder is OFF, the LED will illuminate yellow.
Controls	None (the device is controlled by the host device it is connected to).
Connections	I (Sounder Input); -Ve (Negative); +Ve (Positive); SW (Switched Negative).
Onboard Sounder	Yes. Sounds constantly for standard calls, intermittently for emergency calls.
Onboard Infrared Receiver	No.
Product dimensions (mm)	87 W x 87 H x 24 D mm. Mounts on a UK 25mm single gang back box.
Construction & finish	Plastic.
IP Rating	IP41.
Weight	TBC.
Operating conditions/temperature	-5ºC to +40ºC. Max. relative humidity 95% non-condensing.

NC887D Switchable Sounder Instructions – DNU8874100

EU Declaration of Conformity – 800 Series Overdoor Lights & Sounders (DoC)

Product dimensions:	87 W x 87 H x 24 D mm. Mounts on a 25mm UK single gang back box.

NC887D Switchable Sounder BIM (RFA)

ZFP Addressable Fire Panel Software Download Form