ActiV Conventional Hi-Output W-2.75-9 Wall VAD c/w 100dB(A) Sounder (shallow base)

Order code: BF433C/CC/SR Categories: ,
  • Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
  • Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as a W-4-4 VAD.
  • Impressive 100dB(A) sound output @ 1m.
  • Includes 31 selectable primary tones and an optional secondary tone.
  • Two volume levels (high and low)
  • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
  • Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
  • Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
  • IP21C rated.
  • Manufactured in the UK by C-TEC.

     

Documentation

ActiV Hi-Output Sounder VAD Instructions – DFU4301000

Download


ActiV Conventional Sounders & VADs Brochure – DML0547900

Download


ActiV Hi-Output Sounder Polar Diagram – DFU4301010

Download


VAD coverage (with multiplication factors applied)

VAD coverage depends on factors such as ambient light and viewing angle (direct or indirect). The table below summarises how the coverage of the CA433C/CC/SR increases or decreases based on these factors. To use the table, calculate the lux level of the area requiring coverage, determine whether the viewing angle will be direct or indirect then read off the coverage in the relevant column. For further information refer to our VAD System Design Guide, downloadable from the Documentation tab below.

Wall MountedWallMounted
Lux level in area requiring coverageDirect ViewingIndirect Viewing
000-101 lux14.30m H x 46.80m W4.95m H x 16.2m W
101-200 lux12.10m H x 39.60m W4.67m H x 15.3m W
201-300 lux8.80m H x 28.80m W3.85m H x 12.6m W
301-400 lux6.32m H x 20.70m W3.30m H x 10.8m W
401-500 lux4.95m H x 14.40m W2.75m H x 9m W
501-600 lux3.57m H x 11.7m W2.47m H x 8.1m W
601-700 lux2.75m H x 9.0m W1.92m H x 6.3m W
701-800 lux1.90m H x 6.3W1.65m H x 5.4m W
Approval Certificates
LPCB Third Party Approval Certificate – ActiV Sounders to EN54-3250.02 KB Download
VdS Third Party Approval Certificate – BF433C/CC Range to EN54-2/41.65 MB Download
EU CPR Certificate of Conformity – BF433C/CC/SR (CoC)188.81 KB Download
EU Declaration of Conformity – ActiV Hi-Output Sounder VADs (DoC)76.00 KB Download
EU Declaration of Performance – ActiV Hi-Output Sounder VADs (DoP)181.57 KB Download
Tone List

Here is a list of the 31 primary tone options available on this product (note that Tone 0 = sounder OFF).

Primary Tone List

1. C-TEC Evacuation Tone (UK)

Tone: 610Hz for 0.5s, 810Hz for 0.5s

2. Alert (ALL)

Tone: 825Hz, 1s on, 1s off

3. C-TEC Fast Warble (UK)

Tone: 810Hz for 0.25s, 610Hz for 0.25s

4. Medium Sweep (UK)

Tone: 800 – 970Hz at 1Hz

5. Dutch Slow Whoop (sweep) (NL)

Tone: 500-1200Hz for 3.5s, 0.5s off

6. DIN Tone (DE)

Tone: 1200Hz – 500Hz for 1s

7. Swedish Alternating Tone (SWE)

Tone: 660Hz, 150ms on, 150ms off

8. Swedish all clear (SWE)

Tone: 660Hz constant on

9. Swedish Local Warning (SWE)

Tone: 660Hz, 1.8s on, 1.8s off

10. Swedish Pre-mess (SWE)

Tone: 660Hz, 6.5s on, 13s off, 20s period

11. Swedish Turn Out (SWE)

Tone: 554Hz for 1s, 440Hz for 1s

12. Swedish tone (SWE)

Tone: 660Hz 0.5s on, 0.5s off

13. Evacuation Tone (Apollo Comparable) (UK)

Tone: 550Hz for 0.5s, 825Hz for 0.5s

14. Alternating (Hochiki/Fulleon Comparable) (UK)

Tone: 925Hz for 0.25s, 626Hz for 0.25s

15. French Fire Tone (FR)

Tone: 554Hz for 100ms/440Hz for 380ms to 420ms

16. Australian Alert Tone AS1670 (ISO7731) (AUS)

Tone: 420Hz 0.625s on/off

17. Australian Evacuation Tone AS1670 (AUS)

Tone: 500 – 1200Hz, 0.5s/0.5s off x 3/1.5s off

18. Aus (fast rise sweep) (AUS)

Tone: 3x(500-1200Hz for 0.5s), 0.25s off

19. NZ (slow rise sweep) (NZ)

Tone: 500-1200Hz for 3.75s, 0.25s off

20. US Temporal LF (ISO 8201) (USA)

Tone: 3x(970Hz, 0.5s on, 0.5 off), 1s off

21. US Temporal HF (ISO 8201) (USA)

Tone: 3x(2850Hz, 0.5s on, 0.5 off), 1s off

22. Simulated Bell (USA/General)

Tone: n/a

23. Singapore Alert Tone (SG)

Tone: 1kHz, 2kHz 0.5s alternating

24. PFEER Alert Tone (ALL)

Tone: 950Hz, 0.25s on, 0.25Hz off

25. PFEER Alert Tone (ALL)

Tone: 970Hz, 1s on, 1s off

26. ISO 8201 (ALL)

Tone: 970Hz, 0.5s on/0.5s off x 3/1.5s off

27. ISO 8201 (ALL)

Tone: 2850Hz, 0.5s on/0.5s off x 3/1.5s off

28. Misc Tone 1 (ALL)

Tone: 925Hz continuous

29. Misc Tone 2 (ALL)

Tone: 975Hz continuous

30. Misc Tone 3 (ALL)

Tone: 2850Hz continuous

31. Fast Sweep (ALL)

Tone: 2.5-2.85kHz at 9Hz

In addition to the above primary tone options, one optional secondary tone is available, see below. Please refer to the device’s wiring instructions for details on how to select this.

Optional Secondary Tone

Tone: 2.5-2.85kHz at 9Hz