Conventional Sounder Isolator Controller

  • Designed to meet requirement 17.9.2c of Dutch standard NEN2575.
  • BSI certified to EN54 parts 17 & 18.
  • Easily interfaced to a conventional fire alarm sounder circuit.
  • Allows low-cost, non-fire resistant sounder circuit cabling to be used when used in conjunction with our BF365IM Isolator Modules (subject to fire officer approval).
  • Wiring must be made in a loop arrangement, beginning and ending at the controller.
  • If a wiring fault should occur, the Module(s) nearest to the faulty section of cabling will, if needed, isolate this section. As the Modules are driven from each direction, any loss of cable integrity will have no effect on the functionality of the actual sounders.
  • Fits on standard UK 25mm flush or surface mount back boxes
  • Refer to main instructions for further details
  • Not suitable for use in the UK.

BSI  CE

Documentation

BF365 Sounder Isolator Instructions – DFU3650100

Download


Approval Certificates

Approval Certificate (BSI)

Download


EC Certificate of Conformity (CPR)

Download


Declaration of Performance (C-TEC)

Download


Declaration of Conformity (C-TEC)

Download