MFP 28 Zone Conventional Fire Alarm Panel
- Microprocessor based design.
- Robust metal enclosure c/w lift off lid & heavy-duty base connections.
- 28 conventional Zone circuits.
- 4 conventional Sounder circuits.
- Separate indicators for open circuit, short circuit, head-out, sounder & battery/power supply faults.
- Non-latching class change sounder input, latching fire & non-latching fault outputs (via expansion loom).
- Zone selectable short circuit=fire facility (pre-1980 BS, no resistors in call points).
- Up to 8 two-wire Repeaters per Main panel.
- Multi-lingual variants (subject to quantities).
- Space for 2 x 12V 7Ah VRLA batteries.
- Compatible with virtually all known conventional fire detectors including C-TEC’s ActiV range.
- Designed to comply with BS 5839-4 (this panel in not compliant with EN54-2/4 and should NOT be used in new UK or European installations).
|Mains rated current|
|Internal power supply|
|Total output current limited to|
|Max battery size and type|
|No. of detector zone circuits|
|Call point resistor value|
|Max. devices per detector zone|
|No. of conventional sounder circuits|
|EOL resistor value|
|Max. sounder output current|
|Open collector outputs|
|Product dimensions (mm)|
|Construction & finish|
Dimensions & Mounting Information
|Product dimensions:||521 W x 334 H x 140 D mm.|
|FF387 bezel available for semi-flush mounting.|