Floor Pressure Mat

A durable 90cm x 60cm (3ft x 2ft) floor pressure mat c/w 2m lead and 6.35mm jack plug.
Designed to trigger a Standard call on a Quantec or 800 Series Call System when foot pressure is detected.
Typically located alongside a bed to alert staff to the prospect of a wandering patient in nursing homes, etc. Can also be used in low-level access control applications.
Tough, durable grey PVC finish with a non-slip rubber base.
Simple and reliable operation
Connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points. If connecting to a Quantec-Pro call point, a QP805G1A (6.5mm to RJ12) adaptor is also required.

Compatibility	C-TEC's Quantec and 800 Series Call Systems.
Quiescent current	0mA (none).
Alarm current	Determined by the type of control equipment and number / type of field devices connected to the system.
Indicators	Reassurance LED on host call point will illuminate steady when the floor pressure mat is activated and/or its 6.35mm jack plug is removed.
Connections	6.35mm (quarter inch) jack plug.
Onboard Sounder	No
Onboard Infrared Receiver	No.
Construction & finish	TBC.
IP Rating	IP41.
Dimensions	90 W x 60 H x 5 D mm. 2m long lead.
Weight	TBC.
Operating conditions/temperature	-5ºC to +40ºC. Max. relative humidity 95% non-condensing.
Notes	Can be wiped-clean using a non-caustic sanitising solution.