XFP 16 Zone Repeater Panel (all protocols)
- Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all potential fire service entrances).
- Offers all of the functions and controls of an XFP Main panel (access levels 1, 2 and 3).
- Includes an on-board fault relay.
- Requires its own dedicated Mains power and battery back-up supply.
- A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel.
- Communication between the XFP Main panel and Repeater requires a CFP761 network driver card (fitted as standard in all XFP510-16s, available as an optional extra on Main XFP 16 Zone panels).
- Repeater network wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.
Technical Specifications
Protocol/compatibility | Compatible with C-TEC's XFP CAST, Apollo XP95/Discovery and Hochiki ESP main panels. |
---|---|
Mains supply | |
Mains rated current | |
Internal power supply | |
Total output current limited to | |
Quiescent current | |
Max battery size and type | |
Auxiliary relays | Fault (Failsafe; Capable of switching 1A @ 30V DC; Must not be used for switching Mains voltages). |
PC connection | |
Indicators | |
Expansion connections | On board CFP761 network driver card facilitates the connection of additional XFP Repeaters. |
Product dimensions (mm) | |
Construction & finish | |
IP Rating | |
Weight | |
Operating conditions/temperature | |
Network specification |