Hold/Abort Button

A surface or flush mounting hold or abort button designed to connect to an EP203 automatic extinguisher panel to provide a means of delaying or cancelling the extinguishant release sequence.
Comprises a 35mm black back box, yellow lid and green push button.
Supplied with two branding label options (‘Extinguishant Hold Off’ and ‘Extinguishant Abort’).
Actual operation depends on wiring configuration (if hold and abort functions are required, at least two EP215 buttons will be needed).
IP24 rated (indoor use only).

Quiescent current	0mA (none).
Alarm current	Determined by the type of control equipment and number / type of field devices connected to the system.
Indicators	n/a.
Controls	Green button.
Product dimensions (mm)	87 H x 87 W x 58 D mm. Surface or flush mounting.
Construction & finish	Polycarbonate. Green push button, yellow call point housing, black back box.
IP Rating	IP24.
Weight	TBC.
Operating conditions/temperature	-0ºC to +65ºC. Max. relative humidity 95% non-condensing.

EP215 Hold/Abort Button Instructions – DFU0215000	227.89 KB	Download
EU Declaration of Conformity – EP203 Ancillary Devices (DoC)	159.04 KB	Download
UKCA Declaration of Conformity – EP203 Ancillary Devices (DoC)	196.98 KB	Download

Quantec-Pro Programming & Configuration Tools